- Features & Specs
- More Info
The Atlas 9KBP is a base-plate two-post lift designed for low ceiling garages. The total column height of 111-1/2" (9 feet 3-1/2 inches) allows this lift to be installed in almost any professional or home garage with a ceiling as low as 9 feet 6 inches.
The Atlas 9KBP features dual hydraulic chain-drive cylinders, symmetric arms, and automatic arm restraints. Atlas 9KBP two post "chain over roller" lifts have a spring loaded Secondary Lock System (SLS) that automatically engages in the event of a slack or broken chain.
Dual Point Lock Release - One of the features of this lift is the dual-point lock release. The dual-point lock release features locks in both columns. The lock cable in both columns must be pulled to release the locks.
Chain-Over-Roller Cylinder Configuration - This 2-post lift has the chain-over-roller cylinder configuration. There are two popular hydraulic cylinder configurations used in two post electric/hydraulic above ground lifts: Greg Smith Equipment sells above ground lifts that incorporate both the direct drive cylinder configuration and the chain-over-roller cylinder configuration. The base plate two post above ground lift implements the chain-over-roller configuration. This is the only hydraulic cylinder system that is possible in the base plate lift. The base plate two post above ground is designed for "low ceilings". The direct drive hydraulic cylinder configuration cannot be used in the base plate lift because the hydraulic cylinder would extend above the 9' column when the lift arms were raised to the maximum height. The "overhead" two post above ground lift may incorporate either the direct drive hydraulic cylinder or the chain-over-roller hydraulic cylinder.
Symmetric Arm Design - This lift includes a symmetric column configuration to offer the widest possible Drive Thru. This base-plate above ground lift has symmetric arms to allow easy access to both sides of the vehicle.
Automatic Arm Restraints - are needed to keep the arm "locked" into a position relative to the carriage. When the arms are at rest in the lowest position, the arm restraint pin (which extends below the carriage) is pressed up and the lock (teeth) mechanism is disengaged. The operator can then move the arms so that the lift pads can be properly positioned under the vehicle’s lift points. Once the carriage is raised (approximately 2 inches) the lock is reengaged and the arms cannot be moved. However, the operator may pull the knob or metal ring to manually unlock the arms. Lock restraints do not guarantee that a vehicle cannot be "moved" off of the lift pads. Operator should use care when working on vehicles that have an abundant amount of undercoating (lift pads may "slide") or a significant weight imbalance of the vehicle may occur due to removal of an engine or transmission. Also, "HEAVY wrenching" may result in a vehicle shifting weight on the arm pads. We recommend the use of tall jack stands under the vehicle to add another layer of safety.
Features & SpecsFeatures
- 9,000 lb. Capacity
- Symmetric Arms
- Base Plate Design
- Dual Hydraulic
- Chain-Drive Cylinders
- Secondary Lock System (SLS)
- Free 8 Piece Truck Adapter Set
- Automatic Arm Restraints
- Dual Point Lock Release
- Designed For Low Ceiling Clearance - 9' 3-1/2" Columns
- Mounting Hardware Included
- 2-year Structural Warranty, 2-year Hydraulic-Power Warranty
- Capacity: 9,000 lbs.
- Lifting Time: Ask Your Salesperson
- Overall Height: 111-1/2" (9' 3-1/2")
- Overall Width (With Power Unit): 142" (11' 10")
- Overall Width (Without Power Unit): 134 ½" (11' 2-1/2")
- Outside Column to Outside Column: 124-7/8" (10' 4-7/8")
- Maximum Lift Height: 74-1/2" (6' 2-1/2")
- Minimum Arm Height: 4"
- Base Plate Width: 10-3/4"
- Inside Column: 110" (9' 2")
- Drive Thru: 101" (8' 5")
- Column Size: 7-1/4" x 11-1/8"
- Column Thickness of Steel: 5mm
- Carriage Thickness of Steel: 6mm
- Arms Thickness of Steel: 6mm
- Cable Diameter: .375"
- Base Of Lift: 13-1/2" x 18-1/4"
- Motor Requirement: 3HP 22V Single (1) Phase
- Electrical Requirement: 30 Amp Breaker Required
- Oil Requirement: 3-5 Gallons AW32/AW46
- Floor Requirement: Minimum 4" 3000PSI Concrete
- Shipping Dimensions: 22" x 40" x 113"
- Shipping Weight: 1,400 lbs.
2 Year Structural & 2 Year Hydraulic Warranty
This Atlas product is warranted for five (5) years on structural components two (2) years on hydraulics, and one (1) year on electric or air / hydraulic power units effective from date of invoice. Wear items carry a 90 day warranty. Wear items carry a 90-day warranty. Structural components are considered the Carriage, Columns, Yokes, Arms, Runways, Plungers, etc. Hydraulic components are cylinders, hoses, and fittings. Cables, sheaves, latches and controls are considered wear items.
Our LIMITED warranty policy does not include a labor warranty. Our products are sold at such a competitive price that we cannot afford to send technicians into the field to repair the Atlas equipment. We assume that the buyer of our automotive equipment is mechanically inclined or has employees that are mechanically inclined to perform essential repair services and or maintenance. We also have a list of service technicians that can come to your facility/house at the customer's expense.
NOTE: ALL WARRANTY CLAIMS MUST BE PRE-APPROVED BY THE MANUFACTURER TO BE VALID.
The electric motor for the power unit requires 220 Volt (single phase) 60 Hz (+/- 5%, so 209-231 volts). We recommend using at least a 10 gauge (grounded) wire from the electrical panel. The power unit may or may not have a short pigtail (no plug) that can be wired to either an optional quick disconnect box (mounted on the lift column) or to a male/female plug combination. A 30 amp breaker is required.
The Atlas 9KBP Baseplate Two Post Lift should be installed on a concrete floor. This concrete floor should have a minimum of four (4) inches of concrete with 3000 PSI strength. Most of our above ground lift customers install their own car lifts. The average time to install the Atlas 9KBP car lift is four hours. We provide detailed installation instructions with all our two post above ground lifts and our four post above ground lifts.
Atlas 9KBP Baseplate Two Post Lift Reviews
Add your review