- Features & Specs
- More Info
The Atlas Platinum PVL-9BP is an ALI Certified, 9000 Lbs. Capacity, Commercial Grade Baseplate Two Post Above Ground Lift designed for professional service centers. The open-top design of this lift makes it ideal for garages with low ceilings. The total column height is 111-1/8" (9' 3-1/8"). The Atlas Platinum PVL-9BP can lift a range of the most common vehicles on the market, both foreign and domestic, while also having the capacity to handle both full-size pickups and is backed by one of the Industry’s best warranties.
This product features an ALLY Hydraulic AL3000 Premium Power Unit. This premium power unit is certified by MET Laboratories Inc. for electrical compliance in the United States and Canada. Extra heavy-duty armatures and more motor windings with increased silver metal included in the wires and connections create far less heat generation and allow ALLY Hydraulic power units to maintain constant torque through the lifting process. This power unit also carries an industry leading two-year limited warranty.
Features & SpecsFeatures
- 9,000 lb. Capacity
- ALI Certified
- Symmetric Arms
- Base Plate Design
- Dual Hydraulic Chain-Drive Cylinders
- Secondary Lock System (SLS)
- Free 8 Piece Truck Adapter Set
- Automatic Arm Restraints
- Dual Point Lock Release
- Designed For Low Ceiling Clearance - 9' 3-1/8" Columns
- Premium ALLY Hydraulic AL2300 Power Unit
- Mounting Hardware Included
- Capacity: 9,000 Lbs.
- Overall Height: 111-1/8" (9' 3-1/8")
- Floor Width: 138-3/8" (11' 6-5/8")
- Overall Width (with Power Unit): 144" (12')
- Outside Column To Outside Column: 127" (10' 7")
- Maximum Lift Height: 74-3/4" (6' 2-3/4")
- Minimum Lowered Height: 4-1/2"
- Adapter Height: 3" & 6"
- Inside Column To Inside Column: 111-3/8" (9' 3-3/8")
- Drive Thru: 97-5/8" (8' 1-5/8")
- Arm Length: 27" - 48-3/4"
- Column Measurement: 14-1/4" x 7-5/8"
- Base of Column Measurement: 20-1/2" x 19-1/2"
- Motor Requirement: 220 Volt, Single (1) Phase
- Electrical Requirement: 30 Amp Breaker is Required
- Shipping Dimensions: 44" x 22-1/4" x 113"
- Shipping Weight: 1850 lbs
5 Year Structural & 2 Year Hydraulic Warranty
This Atlas product is warranted for five (5) years on structural components two (2) years on hydraulics, and one (1) year on electric or air / hydraulic power units effective from date of invoice. Wear items carry a 90 day warranty.
Our LIMITED warranty policy does not include a labor warranty. Our products are sold at such a competitive price that Atlas Equipment cannot afford to send technicians into the field to repair the Atlas equipment. We assume that the buyer of our automotive equipment is mechanically inclined or has employees that are mechanically inclined to perform essential repair services and or maintenance. We also have a list of service technicians that can come to your facility/house at the customer's expense.
NOTE: ALL WARRANTY CLAIMS MUST BE PRE-APPROVED BY THE MANUFACTURER TO BE VALID.
CE Tested And Approved
The letters 'CE' appear on many products that are traded in the European Economic Area (EEA). There are 27 member states of the EU and European Free Trade Association. The CE marking attests the verification by a manufacturer that products meet EU safety requirements. It is the manufacturer’s responsibility to carry out the conformity assessment. Conformity assessment testing was performed by CCQS UK Ltd. www.ccqs.co.uk
This Atlas lift (structure and hydraulics) has been tested and has passed the CE conformity requirements. Atlas lifts sold in the USA and Canada use a different power unit than those required by CE. CE requires an electrical control box (with solenoids) that actuates the hydraulic power unit.
Electric power units supplied with above ground lifts in the USA and Canada do not require the electronic control box; therefore the power unit was not tested to CE approval requirements. If you have questions relating to the power unit supplied with your lift, please discuss these with your salesman.
If you are customer from the EU or other foreign county that requires CE approval, please contact our sales office to see how we can help.
The electric motor for the power unit requires 220 Volt (single phase) 60 Hz (+/- 5%, so 209-231 volts). We recommend using at least a 10 gauge (grounded) wire from the electrical panel. The power unit may or may not have a short pigtail (no plug) that can be wired to either an optional quick disconnect box (mounted on the lift column) or to a male/female plug combination. A 30 amp breaker is required.
Chain-Over-Roller Cylinder Configuration
This 2-post lift has the chain-over-roller cylinder configuration. The base plate two post above ground lift implements the chain-over-roller configuration. This is the only hydraulic cylinder system that is possible in the base plate lift. The base plate two post above ground is designed for "low ceilings". The direct drive hydraulic cylinder configuration cannot be used in the base plate lift because the hydraulic cylinder would extend above the 9' column when the lift arms were raised to the maximum height. The "overhead" two post above ground lift may incorporate either the direct drive hydraulic cylinder or the chain-over-roller hydraulic cylinder.
ALLY AL3000 Premium Power Unit
Certified by MET Laboratories Inc. a division of eurofins (Accredited by OSHA and the Standards Counsel of Canada as a Nationally Recognized Testing Laboratory…aka NTRL) to meet the UL 201 3rd Edition: Standard for Safety for Garage Equipment, Revised March 31, 2015, CSA C22.2 Number 68 7th Edition: Motor Operated Appliances Some brands are not certified nor have the UL 201 compliance as required in all USA and Canada cities for electric code. Other brands may not be certified to the current listed standard.
Certified for Electrical Compliance in the United States and Canada.
Some certified brands are only certified in the United States and not Canada.
2.1 Gallons per Minute flow rate.
Most typical brands have a lower flow rate because their electric motor does not produce enough torque over extended time.
208-230-volt single phase. 60 Hz.
Most motors will not operate in the latest 208 voltage systems…they are only rated at 220 volts.
2 hp 3450 rpm motor (3.5 hp motor torque equivalent).
Most motors are rated at 2 HP or even more. However, over the necessary run time lessor quality motors get hot and reduce speed rapidly resulting in deceased torque. ALLY Hydraulic Power Units has extra heavy-duty armatures and more motor windings with increased silver metal included in the wires and connections. ALLY Hydraulic units maintain constant torque through the lifting process because of far less heat generation.
3.5-gallon opaque high-density plastic tank.
Most other brands have a stamped black metal tank that does not allow you to see the fluid levels.
Pressure settings available from 2300 PSI to 3500 PSI.
Most brands do not offer the PSI power range without paying extra to upgrade to either a higher HP motor or converting to three phase power, which is very expensive.
Extra-large junction box for easy installation.
Extra-larger junction box allows installers to access the inside of the box and make electrical connections easier than traditional smaller boxes that makes the wiring and connections cramped…. sometimes resulting in electrical shorts.
Extra heavy-duty Honeywell BE22Q1-AL off/on switch.
This is an extra cost that no power unit manufacturer will spend the extra money on. ALLY Hydraulics elected to use this switch after reviewing our surveys as the number one complaint for all brands is that the on/off switch has the highest failure rate. Ally Hydraulics has used this well known switch model from day one….zero warranty in 4 years!
Pump outlet can be on either side of unit to allow pressure line to be mounted in the same position your current power unit.
Almost all brands do not offer dual outputs in their standard models.
3/8" pipe thread port and internal pipe for lifts that have a cylinder vent return to tank.
ALLY Hydraulics are the only power units in production that allows the return line flow from non-pressured return lines. Additionally, internal lines can be used for slave side hydraulic functions as required by an older lift manufacturer.
Suction tube micro screen filter included.
Most brands include a suction pick up tube but do not include a fine micro-screen to prevent any debris from entering the pump. ALLY Hydraulics includes this for longer pump/motor life.
Dual outlet fitting and 90 elbow fitting include with every power unit for hydraulic lines.
Almost all brands do not include the correct necessary hydraulic line fittings or a 90-elbow hose fitting. This results in additional trips to a specialized hydraulic fitting store. ALLY Hydraulics includes this at no additional cost.
Two-year limited warranty.
Most other brands offer a one-year warranty that does not include prepaid freight both directions. Some other brands offer a limited two-year warranty for an extra cost at time of purchase only from their exclusive installers. ALLY Hydraulics warranties through our resellers and from the factory direct at no additional cost.
Atlas Platinum PVL-9BP ALI Certified Baseplate Two Post Lift Reviews
Add your review