- Features & Specs
- More Info
The Atlas PV series represents the absolute best value for the customer who demands a heavy duty professional grade two post lift at the lowest possible price. Atlas has been manufacturing the PV series two post above ground lifts for over a decade. Thousands sold! Descriptions such as "bullet-proof", built like a brick outhouse, tougher than nails, and other such euphemistic phrases are used every day to describe any of the Atlas PV series models.
The commercial grade Atlas PV-10P two post lift includes some modifications and improvements that make it one of the most popular above ground lifts in the world.
The Atlas PV-10P is the perfect choice for use in either a large commercial service department or for the "pole barn" owner who wants the "biggest and baddest" lift in the county. The Atlas PV-10P is designed and engineered to safely lift (and work on) everything from a Smart Car to a one ton diesel dually.
The Atlas PV-10P incorporates a padded shut-off bar to protect the top of the vehicle from contacting the crossbar. The carriages are equipped with "padded" protective (thick rubber) covers to help prevent the vehicle's doors from damage if opened into the columns or carriages.
The truck adapter set has been augmented (12 pieces vs. 8 pieces) and the rubber lift pad has been reinforced to ensure a solid contact with the vehicle's lifting point.
Single Point Lock Release: This Atlas Lift has a manual single point lock release that allows the operator to release all the safety locks at one time. The spring loaded lock handle and power unit dump valve must be activated at the same time. (two hand operation) If the lock handle is released and the dump valve handle is still being pressed, the lift will continue to descend and all locks will automatically re-engage at the next lower lock point.
12 Piece Truck Adapter: This lift comes standard with a twelve piece truck adapter set. The twelve piece truck adapter set offers many more lift height combinations than standard two piece truck adapter sets
Asymmetric | Symmetric Design: The asymmetric/symmetric arm design offers an extremely low lift pad position on the EZ-metric lift arm configuration. This low pad height will allow the operator to position the lift arms under most small cars (with low pick up points) and heavier pick up trucks.
This lift has symmetrical columns and includes a set of EZ-metric arms. These arms can be configured into the symmetrical position to lift a full loaded pick up truck OR these arms can be configured to the asymmetric position to offer easier opening of the front door on some vehicles.
Features & Specs
- 10,000 lb. Capacity
- Commercial Grade
- Asymmetric/Symmetric Arms
- Automatic Arm Restraints
- "Padded" Shut-Off Bar
- Thick Rubber Covers On Carriages
- Single Point Lock Release
- Direct-Drive Cylinders
- Powder Coat Finish
- Adjustable Height - 11' 11-1/8" or 12' 3"
- Free 12 Piece Truck Adapter Set
- Mounting Hardware Included
- Capacity: 10,000 Lbs.
- Overall Height (HIGH): 147" (12' 3")
- Overall Height (LOW): 143-1/8" (11' 11-1/8")
- Shut-Off Height (HIGH): 140" (11' 8")
- Shut-Off Height (LOW): 136" (11' 4")
- Overall Width: 137-1/2" (11' 5-1/2")
- Outside Column to Outside Column: 125" (10' 5")
- Maximum Lift Height (with Adapters): 82" (6' 10")
- Maximum Lift Height (without Adapters): 71-1/2" (5' 11-1/2")
- Minimum Arm Height: 4-1/2"
- Between Columns: 110" (9' 2")
- Column Size: 14-1/2" x 7-1/2"
- Column Thickness of Steel: 6mm
- Carriage Thickness of Steel: 6mm
- Arms Thickness of Steel: 6mm
- Drive Through (Asymmetrical): 90" (7' 6")
- Drive Through (Symmetrical): 96" (8')
- Base of Lift: 17-1/2" x 20-1/2"
- Cable: 0.375"
- Cylinder Diameter: 2.4"
- Motor Requirement: 3 HP 220V +/- 5% (209-231) volts single (1)
- Electrical Requirement: 30 amp breaker is required
- Oil Requirement: 3-5 Gallons AW32/AW46
- Shipping Dimensions: 29-1/8" x 21-3/8" x 113-3/4"
- Shipping Weight: 1875 lbs
Requires a minimum of 4" of concrete with 3000 psi.
All lifts come with a step by step instruction manual.
5 Year Structural & 2 Year Hydraulic Warranty
This Atlas product is warranted for five (5) years on structural components and one (2) year on electric or air / hydraulic power units and cylinders effective from date of invoice. Wear items carry a 90 day warranty.
Our LIMITED warranty policy does not include a labor warranty. Our products are sold at such a competitive price that Atlas Equipment cannot afford to send technicians into the field to repair the Atlas equipment. We assume that the buyer of our automotive equipment is mechanically inclined or has employees that are mechanically inclined to perform essential repair services and or maintenance. We also have a list of service technicians that can come to your facility/house at the customer's expense.
NOTE: ALL WARRANTY CLAIMS MUST BE PRE-APPROVED BY THE MANUFACTURER TO BE VALID.
CE Tested And Approved
The letters 'CE' appear on many products that are traded in the European Economic Area (EEA). There are 27 member states of the EU and European Free Trade Association. The CE marking attests the verification by a manufacturer that products meet EU safety requirements. It is the manufacturer’s responsibility to carry out the conformity assessment. Conformity assessment testing was performed by CCQS UK Ltd. www.ccqs.co.uk
This Atlas lift (structure and hydraulics) has been tested and has passed the CE conformity requirements. Atlas lifts sold in the USA and Canada use a different power unit than those required by CE. CE requires an electrical control box (with solenoids) that actuates the hydraulic power unit.
Electric power units supplied with above ground lifts in the USA and Canada do not require the electronic control box; therefore the power unit was not tested to CE approval requirements. If you have questions relating to the power unit supplied with your lift, please discuss these with your salesman.
If you are customer from the EU or other foreign county that requires CE approval, please contact our sales office to see how we can help.
The electric motor for the power unit requires 220 Volt (single phase) 60 Hz (+/- 5%, so 209-231 volts). We recommend using at least a 10 gauge (grounded) wire from the electrical panel. The power unit may or may not have a short pigtail (no plug) that can be wired to either an optional quick disconnect box (mounted on the lift column) or to a male/female plug combination. A 30 amp breaker is required.
The overhead bar configuration leaves the floor area between the columns open, and allows the operator to easily roll a transmission jack or a tool box under the car. The padded shut-off bar located below the cross beam prevents the top of the vehicle from being damaged by hitting the cross beam. The padded bar, which contacted automatically shuts off the motor on the power unit to prevent the vehicle from being lifted.
Atlas PV-10P Two Post Above Ground Auto Lift Reviews
Add your review