- Features & Specs
- More Info
The Atlas SLP-9K full rise scissor lift combines an extremely low lift platform height and a 78 inch full rise scissor jack system. The Atlas SLP-9K full rise scissor lift is the perfect above ground lift for those customers with ceiling height restrictions and the need for "enough lift" to raise pick-up trucks. This Atlas full rise scissor lift is also perfect for those service shops that want to avoid the cluttered look of dozens of vertical lift columns.
The Atlas SLP-9K can also be flush mounted. The flush mounted scissor lift gives the service area a "clean look" and also provides a "flat surface" which can be driven over from any angle, making it easy to position the vehicle over the lifting platforms.
The 31" adjustable distance between the lift platforms of the Atlas SLP-9K scissor lift can accommodate a full frame, uni-body, or SUV (truck) lifting points.
It is highly recommended that you purchase the Atlas Scissor Lift Support Bars if the intended use is for lifting heavier vehicles (pickup trucks and SUVs) with narrow frames.
The best way to position any vehicle on a scissor lift (with horizontal cylinders) is to allow some space (2-6 inches) between the lifting surface of the lift and vehicle’s lifting points.
The separate control panel may be conveniently positioned to allow easy access for the operator. The 220 volt (single phase) electric/hydraulic power unit is housed inside the metal control panel box. The push button controls activate the raising and lowering of the lift. The sophisticated 10 position air actuated lock system is automatically engaged and disengaged as the lift is being raised or lowered.
Each hinge point has a zerk grease fitting to allow maximum lubrication to each joint. The UHMP wear blocks ensure years of smooth operation of the lifting surface.
The lift has a safety lowering limit switch. Once the lift platforms are lowered to within 10 1/2 inches of the ground, the lift automatically stops its descent. The Down button needs to be released and depressed again to allow the lift to go down completely.
The Atlas SLP 9K has locking approach ramps (attached to the lifting platforms) that can be locked into a horizontal position after the lift is locked at the desired working height.
Features & SpecsFeatures
- 9,000 LB. Capacity
- 78" (6' 6") maximum lifting height
- Adjustable width
- 10 air actuated locking positions
- 220V single phase motor
- Open middle for easy access
- Locking approach ramps
- Zerk grease fittings at each hinge point
- Open middle for easy access
- 1 Year Structural and Hydraulic Warranty
- Separate Self-Contained Control Panel
- CE Tested and Approved
- Lifting Capacity: 9,000 lbs.
- Max Lifting Height: 78" (6' 6")
- Overall Length: 82"
- Max Overall Width: 82"
- Lift Platform: 59 " x 24"
- Lowered Height: 4 "
- Width Between Platforms: Adjustable up to 31"
- Approach Ramps: 11" x 24"
- Power Unit: 2 HP 220V +/- 5% (209-231volts) 1 phase
- Locking Positions: 10
- Locks Actuated: Air
- Lifting Cylinders: 4 (2 In Each Platform)
- Oil Requirement: 3.5 Gallons AW32/AW46
- Electrical Requirement: A 30 amp breaker is required
- Shipping Dimensions: 54" x 48" x 85"
- Shipping Weight: 2400 lbs
1 Year Structural & 1 Year Hydraulic Warranty
This Atlas product is warranted for one (1) year on structural components and one (1) year on air or electric hydraulic power units, pneumatic power units, cylinders and major components from date of invoice. Wear items are covered by a 90 day warranty.
Our LIMITED warranty policy does not include a labor warranty. Our products are sold at such a competitive price that Atlas Equipment cannot afford to send technicians into the field to repair the Atlas equipment. We assume that the buyer of our automotive equipment is mechanically inclined or has employees that are mechanically inclined to perform essential repair services and or maintenance. We also have a list of service technicians that can come to your facility/house at the customer's expense.
NOTE: ALL WARRANTY CLAIMS MUST BE PRE-APPROVED BY THE MANUFACTURER TO BE VALID.
CE Tested And Approved
The letters 'CE' appear on many products that are traded in the European Economic Area (EEA). There are 27 member states of the EU and European Free Trade Association. The CE marking attests the verification by a manufacturer that products meet EU safety requirements. It is the manufacturer’s responsibility to carry out the conformity assessment. Conformity assessment testing was performed by CCQS UK Ltd. www.ccqs.co.uk
This Atlas lift (structure and hydraulics) has been tested and has passed the CE conformity requirements. Atlas lifts sold in the USA and Canada use a different power unit than those required by CE. CE requires an electrical control box (with solenoids) that actuates the hydraulic power unit.
Electric power units supplied with above ground lifts in the USA and Canada do not require the electronic control box; therefore the power unit was not tested to CE approval requirements. If you have questions relating to the power unit supplied with your lift, please discuss these with your salesman.
If you are customer from the EU or other foreign county that requires CE approval, please contact our sales office to see how we can help.
The electric motor for the power unit requires 220 Volt (single phase) 60 Hz (+/- 5%, so 209-231 volts). We recommend using at least a 10 gauge (grounded) wire from the electrical panel. The power unit may or may not have a short pigtail (no plug) that can be wired to either an optional quick disconnect box (mounted on the lift column) or to a male/female plug combination. A 30 amp breaker is required.
Atlas SLP-9K Commercial Grade Full Rise Scissor Lift Reviews
Add your review