- Features & Specs
- More Info
The SWC-750 is designed to handle light diesel engines and engine parts for the truck repair and maintenance trade. It is a full foot taller than our standard SWC-500. The cut-away sides under the door allow you to wheel your engine crane right over the table for easy loading and unloading. The 2hp motor keeps the turntable turning under the heaviest of loads. 22 high pressure spray jets quickly clean the greasiest engine components whether they are on the turntable, hanging from the parts tree or in the standard parts basket. The 60 minute timer means the washer can be left unsupervised so your mechanic can go on to the next job while the washer is running. When he gets back the parts are clean and dry within seconds of unloading. The parts washer requires no harmful solvents using only hot water and biodegradable detergents for an environmentally safe operation. The standard stainless steel skimming disc extends the life of your cleaning solution.
The SWC-750 Spray Wash Cabinet incorporates maximum performance, durability and ease of use meet today's demands for complex cleaning. By using an octagonal, full-opening door, more than 55% of the turntable is exposed, allowing operators enhanced loading capabilities. The heavy-duty, 12 gauge steel cabinet was strengthened for greater durability, then we coated it with an industrial two-step primer and polyurethane finish to provide years of protection. The SWC-750 Spray Wash Cabinet also features simple operating controls, stainless-steel nozzles, a large 70-gpm pump and a gasket-free door. Add up all of these features and you have a spray-wash system that can do more than clean parts, it can brighten your future.
Heavy Duty 70 GPM Pump
FREE 5 Gallon Cleaning Solution Included: Pure Clean #10 Industrial Cleaner/Degreaser is designed to safely remove dirt and oil. It is concentrated, biodegradable, nontoxic, nonflammable, and non-corrosive. Pure Clean #10 has a strong affinity for oil and contaminants, and loosens them form the parts. Most oils float to the surface, where they can be removed easily by shimming wheels/belts, absorption blankets, or vacuuming. Turning off agitation allows solid particulates and fine metal particles to settle on the bottom, where they can be filtered off as sludge via recycling filtration systems.
Oil Skimmer with Cycle Timer
Three Rack with Components Basket
Timer with Automatic Shut-Off
Features & SpecsFeatures
- 53 Gallon Tank
- Automatic cleaning
- Industrial Grade Soap Included
- Uses only soap and water. No harmful solvents or tanks required
- Casters provide mobility
- Parts basket and tree
- Heavy duty 70 gpm pump
- Timer with auto shut-off
- Front loading design
- Cleans small and large parts
- Oil skimmer
- Accommodates engine crane loading
- Turntable rotates at 3 rpm
- 3/16" vents spray solution at 30-60 gpm
- Solution is filtered and recycled
- 1,250 lb. load capacity
- Includes 5 Gallon Soap Solution
- Inside Height: 54"
- Inside Width: 32"
- Turntable Diameter: 30"
- Overall Height: 78"
- Floor Space Required: 44"W x 43"D
- Load Capacity: 1,250 lbs.
- Cycle Time: 60 min. std.
- Motor: 2-HP
- Pump Output: 70 gpm
- Heater: 6 kw
- Solution Capacity: 50 gal.
- Filter Area (Screen): 170 sq. in.
- Electrical Requirements: 220vac, 1 Ph, 30 amps
- Shipping Dimensions: 45" W x 45" D x 83" H
- Shipping Weight: 960 lbs
Atlas SWC-750 Spray Wash Cabinet Reviews
Add your review