BendPak 4-Post Parking Lift Power Unit PL-18000

Availability: In stock




Quick Overview

The PL‐18000 Power Unit by BendPak is a 4‐post auto stacker parking lift designed for indoor or outdoor operation and is the most cost effective way to triple the capacity of typical parking areas. The 3‐stacker PL‐18000 is the ultimate space saver allowing three vehicles to be stacked in a single parking space.


Price shown is when purchased with lift.  If purchasing separately call for pricing

BendPak 4-Post Parking Lift Power Unit

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • BendPak 4-Post Parking Lift Power Unit
  • bendpak-4-post-parking-lift-3-level-pl-18000
  • bendpak-storage-lift
  • bendpak-4-post-car-lifts
  • auto-lift-auto-stackers
Features & Specs
More Info


PL-18000 parking lift available by special order only.

The PL-18000  can accommodate both cars and SUVs and may be  configured as a stand-alone lift or combined into rows of multiple  units. When installed in rows of multiple  units, the lifts share columns dramatically increasing space efficiency. The  rugged built design utilizes a dependable hydraulic and cable-based lifting  system for ultimate efficiency and safe operation.

Each  stacking system incorporates many distinctive features such as a full-width  platform to keep bottom vehicles protected, single hydraulic lifting cylinder  combined with heavy-duty steel lifting cable, automatic safety locks and  reliable, ergonomic hydraulic power unit.

These  state-of-the-art lifting systems are well suited for commercial parking  environments and are powered by independent electric-hydraulic pump  units or a multi-unit power station pump system that can operate up to 10 lifts depending on the configuration, layout, and other technical factors.  They can be configured for 208-230-volt, 380-volt or 440-volt operation with International  voltages also available. Multi-unit pump systems require their own dedicated  3-phase power circuit.

At BendPak, we  believe in creating solutions that simplify your life. Our history of  manufacturing excellence began more than 45 years ago and we continue to design  and manufacture innovative car stacker parking solutions with features and operating  characteristics that meet customer requirements for quality, reliability,  safety, and value. 

Features & Specs

FEATURES PL-18000 Lift

  • Superstructure features durable powder-coat finish
  • 6,000 lb. capacity per deck / 18,000 lb. capacity total
  • Perfect for cars, light trucks, motorcycles and ATV’s
  • Platforms hot dip galvanized per ASTM standards
  • Rugged I-beam and C-channel construction
  • Single hydraulic cylinder with heavy-duty steel lifting cable
  • Built-in wheel stops
  • Heavy-duty steel construction
  • Wide base-plate for maximum stability
  • Reliable electric-hydraulic power system
  • Front and rear wheel chocks
  • Full-width platform to keep bottom vehicles protected
  • Two-position fail safe locking system
  • Simple controls


  • Overall length: 193" / 4,911 mm
  • Lifting capacity:18,000 lbs. / 6,350 kg
  • Platform length: 155" / 3,928 mm
  • Overall width: 114" / 2,896 mm
  • Platform width: 95" / 2,413 mm
  • Overall height: 364" / 9,257 mm
  • Voltages: 208-230-volt, 380-volt or 440-volt

*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult for a complete list.



Check items to add to the cart or select all

More Info

BendPak 4-Post Parking Lift Power Unit PL-18000 Reviews

Browse for more products in the same category as this item:

Car Lifts
Car Lifts > Specialty Lifts
Car Lifts > Parking Lifts
Top Brands
Top Brands > BendPak
Top Brands > BendPak > BendPak Lifts > 4 Post Lifts
Top Brands > BendPak > BendPak Lifts